Friday, 7 October 2011

Problems getting a 2004 Hyundai Tiburon GT Automatic to start after pumping fuel?

Hello Everyone,



I have this problem with my car, whenever I go to the gas station and pump fuel into my car, my car has got the hardest time starting. When I am done pumping gas I go to turn the car on and it turns off on me. The way I get it started is as I go to turn on the car I have to press down on the gas pedal while in park for about 10 seconds and quickly change into drive to get my car moving.



This problem does not occur again after it has been turned off. My car starts up normally after turning it on and off randomly. I only have the problem where it wont start after pumping fuel.



Another problem with the car is that my RPM's keep on shifting every ones in a while, it constantly moves from 2000 to 1000 to 1500 to 500 RPM while it is in stall over a period of less than 30 seconds.



I have had my car looked at and got my fuel injectors changed and my oxygen sensor cleaned up due to a build up of carbon. Now I am not sure what to do with it. I may believe that it could be a fuel sensor or something.



If anyone out there has got any idea of how to fix this I would be greatly appreciated, I have dealt with this for the past six months and may believe the problem could get worse.



ThanksProblems getting a 2004 Hyundai Tiburon GT Automatic to start after pumping fuel?have you tried fuel treatment or had the fuel system flush out
  • cs files
  • graphics animation
  • Why will my 1990 TBI 350 suburban not let fuel out of the injectors?

    My suburban died on the side of the road. I unhooked the fuel lines and turned on the switch. I am getting plenty of fuel from the fuel pump.I rebuilt injectors, then changed out the entire Tbi and still get no gas from the injectors. I'm thinking the computer is gone but why and where do i get one? If i pour gas into the top of the Tbi it will start then die.HELP!!!Why will my 1990 TBI 350 suburban not let fuel out of the injectors?Your pick up coil in the distributor is what times the fuel . It is what i would check. It also can stop firring to your plugs.
    Why will my 1990 TBI 350 suburban not let fuel out of the injectors?
    It is possible that the computer is not triggering the injectors to open to let the fuel out. I would check first to see if you are getting any voltage to the injectors first. There can also be a short between the computer and the injectors or maybe even some bad sensors not letting the computer know when to fire the injectors. If it is your computer there can be many reasons why it would go. A cheap place to get an oem used computer would be a site called U Need A Part, http://www.uneedapart.com. Just make a request on there and you will get responses back with prices from salvage yards that have your computer.

    I have fuel going to my engine but it's not getting fuel. I changed the fuel regulator. What next?

    The truck is a 1991 F150, inline six. 4.9L



    We know it's pumping gas. We know it has gas, but the gas isn't getting to the engine. Maybe fuel injectors? How do I tell? The engine sat for over a year but ran fine before it sat. Please help. I will send you homemade cookies if you help me start this truck!!! (seriously).I have fuel going to my engine but it's not getting fuel. I changed the fuel regulator. What next?It may not be injectors. One do you have spark? If not it%26quot;s probably the DIS or TFI module. Next thing is the timing chain. a week ago I bought a Ranger $75 becauce they couldn't get it to run, they put in a new injectors, fuel pumps, DIS module, sparkplugs, wires coils. I put in a $7 timming belt, runs great. If there was a injector problem the computer would tell you, Remember the four things a engine needs Air, Fuel, Spark, and all at the right time. If your truck has 100,000 miles or more it's probably the timing chain.



    Sorry gearbox, you are right, the 300 6 has gears but they can still wear. I lost the gear on my distributor at 300K miles once.



    kwhotrods's I can't believe I forgot about that one. It's the first thing I check on the roadside. great answer
    I have fuel going to my engine but it's not getting fuel. I changed the fuel regulator. What next?
    see if your injectors are firing...listen to them with a stetoscope or long screwdriver held to your ear..they should be clicking loudly when turming over
    I have fuel going to my engine but it's not getting fuel. I changed the fuel regulator. What next?
    Fuel filter?
    A fuel pressure gauge will let you know if the engine is getting enough fuel pressure to run. If it is, then use a test light to see if the injectors have power to one side, and a pulsing ground to the other side of the wiring connector. If all this is good, then the injectors are bad. The fuel in them may have varnished, clogging them up. 1991 is pre dpi, or deposit resistant injectors, and were bad about that. And chocolate chip!!!
    If there is no fuel at the injectors check the emergency shut off switch.
    step one no timing chain.. has a gear



    Ok how far is it getting gas? I'm asking as those trucks went from a low pressure pump in the tank, to a switcher, to a higher pressure on the rail to a fuel filter to the fuel line and then the regulator to go back



    if you have any blocks along the way it will stop it... also try starting the truck without any jumping off the starter solenoid if someone is doing that, sometimes it messes them up like that....



    But after that, you will need to get a fuel pressure gauge.. in the US I think this is one of the things autozone and other mass stores lend out to customers for a fee .. you will need about 50 psi of fuel pressure at the rail for it to be really healthy.

    if you have 50 psi of pressure, then you will need to see if the engien is sparking to see if the ignition module may have gone out.. if yes you have other issues...



    But my guess is you have fuel pressure but either not enough or the fuel is so varnished that it won;t start.. and would need to be cleaned to get working again.
    the pressure regulator may be gummed up, try some starting fluid and see if the pump will push the fuel thru while the engine is running on the starting fluid, it might take a couple of times

    How to repair P0507 Idle Control system high on Nissan Altima 2003?

    I check my fuel injector, change the oil filters and gas filter. and my car still sounds like it's idling highHow to repair P0507 Idle Control system high on Nissan Altima 2003?Idle speed control speed needs to be reduced. P0507 happens when the suggested idle speed from the Engine control does not match up with reccomended idle rpm. For your information the throttle chamber is a 5/50,000 mile item and if your car has less than 70,000 on it Nissan Might goodwill the part replacement. $750 you will not spend. Be nice just ask. Now if you have never returned to the dealer for anything like oil changes tire rotates and service Nissan might think you do not like them.

    The Story go's I was thinking about purchasing the new 2007 Altima due out anytime soon but if you all cannot repair my current car I might think I will go with a Toyota Camary!!
    How to repair P0507 Idle Control system high on Nissan Altima 2003?
    The best way is to take the car to a well experienced mechanic shop that knows how to fix that type of problem.

    Fuel injector cleaner ?

    I have a 2000 4 runner the dealer wants $80 to clean the injectors. do i need realy go with the dealer or can i just buy some at the auto parts store and if so is ther a brand i should use and will i need to change my spark plugs after i clean the injectorsFuel injector cleaner ?Pat-



    The injector cleaning process at the Dealership is really the best one to have done. This is a special solvent they will run through the injectors that removes the varnish build-up.



    After they do this procedure you are going to notice engine power that will return.



    I would also recommend that you have the spark plugs and wires changed at this point because thay have been on your vehicle probably since it was new. Good time to have them done.



    Now a tip for the future. The discount gasolines do not carry the same quality as Shell, Chevron or Union 76. These fuels have a more extensive additive and cleaning package that is added to them to help keep the injectors clean.



    Periodically its a very good idea to pick up one of the in-tank fuel injector cleaners and use these products. The one that I have had the best results with is Chevron's Techron. This can be purchased at Chevron or Kragen, Auto Zone, Pep Boys, Checker, Shucks, O'Rielly or any other parts house.



    Toyota also has an in-tank injector cleaner available through their parts houses.



    Only use these products ONCE per oil change cycle, (3000 miles or 90 days), as more frequest use can cause catalytic converter problems. So be sure to double check the manufacturer's recommendations on the back of the product label.



    Its OK to run the discount fuels, but just be sure that you use these injector cleaners when you are using these fuels.



    Other than that you should be good to go.



    Good Luck!
    Fuel injector cleaner ?
    if thats all your mechanic was planning on doing, then yes...



    if they were going to remove them, disassemble, and clean thoroughly, then no...
    Fuel injector cleaner ?
    Most injector cleaner that they use at a dealership use a compressed cleaner that goes through your injectors instead of the regular gas. This involves some disassembly and reassembly.



    If this recommendation was because of some specific problem you are having, an over the counter add to gas cleaner probably will not do the trick. If, however, this is just a recommendation that they make at the 30,000 or 60,000 mi service, you can probably get by with just a can of additive.
    Initially I'd go with the a commercial injector cleaner that you can buy at an auto parts store. Get a good brand and use it as directed (i.e.- one can per so many gals of gas) and see if you feel a difference. You MAY notice a difference after you run one tank thru it (more pep or improved mileage). It's an inexpensive try before you go and shell out the big bucks.

    Fuel bleeding procidures for diesel powered Massey Furgerson 65?

    We change both fuel filters and where is the bleeder screw on the injector pump.Fuel bleeding procidures for diesel powered Massey Furgerson 65?Loosen the injector lines at the injector pump. Then after fuel is comming out there tighten and loosen the lines at the engine. Then tighten when fuel it cooming out there. My 65 doen't have a bleed vaulve.
    Fuel bleeding procidures for diesel powered Massey Furgerson 65?
    Crack the fitting attached to each injector and turn the diesel over. This will bleed the lines.
    Fuel bleeding procidures for diesel powered Massey Furgerson 65?
    fill the new filters with fuel and it should start without bleeding the lines
    WHAT I HAVE DONE IN THE PAST IS JUST FILL THE FUEL FILTER COMPLETELY WITH FUEL AND THE MOTOR WILL START UP, THERE IS NO NEED TO BLEED ANYTHING ELSE.
    Bleeder screws are for brakes...... Call Tractor Supply (TSC) or local tractor dealer or look it up on-line
  • domain name registration
  • lock file
  • Why Am I Experiencing Loss of Full Potential When Accelerating? Fuel Injector / Fuel Pressure Issue? '95 Ram?

    95 Ram 1500, 5.2/318, 2x4, 184000 miles.



    It feels like my truck doesn't put out as much power as it should. I can apply the accelerator sometimes and it feels like my truck doesn't want to go any faster, then if I push just a little closer to the floor it jumps to 3200 RPMs and takes off (and this happens without going fully to the floor) but still doesn't feel like a V8. At first I thought that maybe the accelerator cable might be stretched or something so I replaced that and nothing changed. I have even temporarily rigged up the accelerator cable from inside so that it will give more gas when I apply less pressure - it seemed to help but was a temporary experiment. I tested all the vacuum lines that I could find and they seemed to be ok except for 2 door actuators on the a/c unit. Replaced them both and are now holding vacuum. The throttle body looks clean and no valves in it appear to stick. It doesn't idle erratically and the RPMs appear to be normal otherwise. I would think that fuel filter would cause more issues and affect the idling. If fuel pump was going I think It would feel like the truck was going to die at a stop. Could this be caused by fuel injectors?



    Sorry this is long but I wanted to make sure you knew everything. Thanks for reading and for helping.Why Am I Experiencing Loss of Full Potential When Accelerating? Fuel Injector / Fuel Pressure Issue? '95 Ram?I have a 97 and a 99 Ram. This sounds very familiar, and may even act like the trans is slipping? The most common problem? A blocked Catalytic converter. To check it, hit it with your fist to see if it rattles. The ceramic %26quot;honey comb%26quot; starts to break apart blocking the exhaust. This causes the computer to go wacky on you. The computer controls the engine and the trans. It will progressively get worse until the check engine light comes on from the O2 sensor. My 97 got so bad, it only went 30mph with the pedal to the floor. Allot of good transmissions have been replaced because of this.

    Good luck!
    Why Am I Experiencing Loss of Full Potential When Accelerating? Fuel Injector / Fuel Pressure Issue? '95 Ram?
    cheak your throtle position sensor